| P.1. | |||||||||||||||
| One-pot primer for adhesion | |||||||||||||||
|
|
|||||||||||||||
|
|||||||||||||||
|
ONE- POT PRIMER PRIMER DESCRIPTION
Nautix P 1 primer is used to improve the adhesion of paint on GRP surface : new and clean GRP surface or bare GRP. Nautix P 1 can also be applied as a barrier coat between two antifouling paints. Very easy application : Nautix P 1 is a one-pot primer and one coat is enough. COMPOSITION Vinylic resin. Colour : grey. Finish : gloss. Solvent : acetatebuthyl, MIBK PREPARATION The hull must be free from grease (Degreaser Nautix SD), tarnished, rinsed with fresh water, clean and dry. Any loose paint must be removed. APPLICATION Shake and stir thoroughly before use. Do not apply under 10°C. Application method : brush, roller, spray gun. Number of coat : 1 Thinner - Cleaner : Nautix DP - Maximum dilution : 10 % Recommended wet coat thickness per coat : 80 microns. DRYING TIME
TECHNICAL DATA Pack sizes : 0,75 Ltr - 2,5 Ltr - 20 Ltr. Product weight Kg/Ltr : 1,1 +/-0,05. Volume solids : 34 % +/- 3. Coverage : 13 m2/Ltr. Flash point : 25°C SAFETY DATA R 10 : Flammable. R 20-21-22 : Harmful by inhalation, in contact with skin and if swallowed. S 2 : Keep out of the reach of children. S 16 : Keep away from sources of ignition - No smoking. S 25 : Avoid contact with eyes. S 26 : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 35 : This material and its container must be disposed of in a save way. S 36-37 : Wear suitable protective clothing and gloves. S 38 : In case of insufficient ventilation, wear suitable respiratory equipment. S 46 : If swallowed, seek medical advice immediately and show this container or label.
|
