P

P.C.

One-pot undercoat Recommended as a barrier coat between two paints or to protect and prepare bare wood.

	Application by brush, roller, spray gun
	10m²/Ltr per coat
	At 15 C: wait 3 hours between coats
	End dry after 6 hours
	0,75 L - 2,5 L - 20 L

1- POT PRIMER FOR PROTECTION & ISOLATION

PRIMER

DESCRIPTION

Conventional anticorrosion primer for marine environment to be applied on bare and scoured metal.

Primer for protection and adhesion on wood before application of filler.

Nautix PC primer is used as a barrier coat between two paints also improving their adhesion.

It ensures reliable protection and preparation of bare wood.

Nautix PC is easy to use (one coat is enough).

COMPOSITION

Chlorinated rubber resin, aluminium paste, synthetic resin.

Colour : buff.

Finish : gloss.

PREPARATION

The surface must be free from grease (Degreaser Nautix SD), clean and dry. Any loose paint must be removed.

APPLICATION

Shake and stir thoroughly before use.

Do not apply under 10°C.

Application method : brush, roller, spray gun.

Recommended number of coat :

	1 coat if PC primer is used as barrier coat between two paints
	3 coats is PC primer is used as conventional anticorrosion protection

Thinner - Cleaner : Nautix DA - Maximum dilution : 10 %

Recommended wet coat thickness per coat : 100 microns.

Recommended dry coat thickness per coat : 50 microns.

DRYING TIME

TECHNICAL DATA

Pack sizes : 0,75 Ltr - 2,5 Ltr - 20 Ltr.

Product weight Kg/Ltr : 1,3 +/-0,05.

Volume solids : 60 % +/- 3.

Coverage : 15 m²/Ltr.

Viscosity : thixotropic.

Flash point > 23°C

SAFETY DATA

R 10 : Flammable.

R 20-21-22 : Harmful by inhalation, in contact with skin and if swallowed.

S 2 : Keep out of the reach of children.

S 16 : Keep away from sources of ignition - No smoking.

S 25 : Avoid contact with eyes.

S 36-37 : Wear suitable protective clothing and gloves.

S 46 : If swallowed, seek medical advice immediately and show this container or label.